Mild Steel,0.125 on GX 10K · delivered 2026-09-01 04:57:10 · app job ex2-dirty-1788232431 · program number source: operator
2 RED / 4 YELLOW warnings -- called out in the program text. Read them before running.
RED -- comp on the WRONG SIDE (offset into the part) on bnd [5, 6, 7] -- cuts undersize, do not run
RED -- cut AFTER the severed outer that contains it (bnd, outer): [(5, 2), (7, 2), (6, 3)] -- outer profile must finish last (re-sequence hazard, Jordan 2026-08-28)
YELLOW -- pierce bnd 3 clear air 0.0000 < 0.15 standoff (X70.736 Y43.663)
YELLOW -- pierce bnd 2 clear air 0.1223 < 0.15 standoff (X28.929 Y39.353)
YELLOW -- pierce bnd 1 clear air 0.1227 < 0.15 standoff (X70.522 Y42.922)
YELLOW -- pierce bnd 5 clear air 0.1341 < 0.15 standoff (X11.930 Y51.726)
comp on the WRONG SIDE (offset into the part) on bnd [5, 6, 7] -- cuts undersize, do not run
bnd 2 is PROFILE but posts #501=#107/D1 -- table says #108/D3
bnd 3 is PROFILE but posts #501=#107/D1 -- table says #108/D3
bnd 5 is SMALL but posts #501=#108/D3 -- table says #106/D2
bnd 6 is SMALL but posts #501=#108/D3 -- table says #106/D2
bnd 7 is SMALL but posts #501=#108/D3 -- table says #106/D2
cut AFTER the severed outer that contains it (bnd, outer): [(5, 2), (7, 2), (6, 3)] -- outer profile must finish last (re-sequence hazard, Jordan 2026-08-28)
pierce bnd 3 clear air 0.0000 < 0.15 standoff (X70.736 Y43.663)
pierce bnd 2 clear air 0.1223 < 0.15 standoff (X28.929 Y39.353)
pierce bnd 1 clear air 0.1227 < 0.15 standoff (X70.522 Y42.922)
pierce bnd 5 clear air 0.1341 < 0.15 standoff (X11.930 Y51.726)
MetaCam-safety census on the delivered DXF: PASS -- POLYLINE x7, SEQEND x7, VERTEX x402 (only POLYLINE/VERTEX/SEQEND/CIRCLE may appear).
Delivery set of the single reviewed part. The customer-facing sheet (customer/shop split) and the nested-sheet program packet are later bricks -- this set is shop-facing. Versions are immutable: a re-delivery supersedes this build in the app's version list, this page stands.