kerfmaster -- ex2_dirty.dxf delivery v5 (O33290)

Mild Steel,0.125 on GX 10K · delivered 2026-09-01 13:41:49 · app job ex2-dirty-1788232431 · program number source: operator

⬇ O33290.nc ⬇ ex2_dirty_shop.dxf ⬇ ex2_dirty_tooling.json ⬇ ex2_dirty_slugs.csv ⬇ customer.html ⬇ packet.html ⬇ packet.json ⬇ ex2_dirty_delivery_v5.zip

2 RED / 4 YELLOW warnings -- called out in the program text. Read them before running.

RED -- comp on the WRONG SIDE (offset into the part) on bnd [5, 6, 7] -- cuts undersize, do not run

RED -- cut AFTER the severed outer that contains it (bnd, outer): [(5, 2), (7, 2), (6, 3)] -- outer profile must finish last (re-sequence hazard, Jordan 2026-08-28)

YELLOW -- pierce bnd 3 clear air 0.0000 < 0.15 standoff (X70.736 Y43.663)

YELLOW -- pierce bnd 2 clear air 0.1223 < 0.15 standoff (X28.929 Y39.353)

YELLOW -- pierce bnd 1 clear air 0.1227 < 0.15 standoff (X70.522 Y42.922)

YELLOW -- pierce bnd 5 clear air 0.1341 < 0.15 standoff (X11.930 Y51.726)

comp on the WRONG SIDE (offset into the part) on bnd [5, 6, 7] -- cuts undersize, do not run

bnd 2 is PROFILE but posts #501=#107/D1 -- table says #108/D3

bnd 3 is PROFILE but posts #501=#107/D1 -- table says #108/D3

bnd 5 is SMALL but posts #501=#108/D3 -- table says #106/D2

bnd 6 is SMALL but posts #501=#108/D3 -- table says #106/D2

bnd 7 is SMALL but posts #501=#108/D3 -- table says #106/D2

cut AFTER the severed outer that contains it (bnd, outer): [(5, 2), (7, 2), (6, 3)] -- outer profile must finish last (re-sequence hazard, Jordan 2026-08-28)

pierce bnd 3 clear air 0.0000 < 0.15 standoff (X70.736 Y43.663)

pierce bnd 2 clear air 0.1223 < 0.15 standoff (X28.929 Y39.353)

pierce bnd 1 clear air 0.1227 < 0.15 standoff (X70.522 Y42.922)

pierce bnd 5 clear air 0.1341 < 0.15 standoff (X11.930 Y51.726)

MetaCam-safety census on the delivered DXF: PASS -- POLYLINE x7, SEQEND x7, VERTEX x402 (only POLYLINE/VERTEX/SEQEND/CIRCLE may appear).

The customer sheet reads, verbatim (customer.html in this delivery set):

“One ex2_dirty.dxf part, cut from Mild Steel, 0.125" thick.”
“Finished size: 70.736" x 51.862".”
“2 points on this job need a decision before we cut -- we will review them with you first.”
“Prepared 2026-09-01 13:41:49 -- revision 5, replacing revision 4.”

Delivery set of the single reviewed part -- shop set plus the customer sheet (customer/shop split, one dataset two renderers); the nested-sheet program ships as its own delivery. Versions are immutable: a re-delivery supersedes this build in the app's version list, this page stands.